Filter
Top Products
GE863-PRO
3
Hardware User Guide
1vv0300773a Rev. 0 - 24/01/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 49 of 64
9 The Evaluation Kit for Telit GE863-
PRO
3
Modules
9.1.1 Short Description
Telit supplies the Evaluation Kit for Telit GE863-PRO
3
modules to assist the designer in developing his
own applications based on GE863-PRO
3
Telit module.
The GE863-PRO
3
EVK is formed by a mother board and a dedicated Telit module Interface Board
with RF antenna connectors.
It provides a fully functional solution for a complete M2M application.
The motherboard has a power supply and is equipped with SIM card housing, RS 232 serial port level
translator, direct USB2.0 Host & Device connection, Smartcard ISO7816 slot, SD-MMC Card slot and
10/100 Mb Ethernet.
The only items you have to provide are:
1) a personal computer or microcontroller ;
2) a SIM card with a valid Network subscription;
3) a power supply
The connection between the GE863-PRO
3
EVK and your PC (or other DTE) are realized by standard
RS232 ports.
The communications between the application ARM and Telit GSM/GPRS engine is realized
connecting the Asynchronous Serial Interfaces of the module’s ARM&GSM/GPRS by setting
appropriately the Jumpers.
Furthermore the communications between ARM and GSM/GPRS can be analyzed with two “sniffed”
serial ports that can report both sides of the ARM-GSM/GPRS serial channel.