Filter
Top Products
12
RQT6866
Control guide and preparatory steps
13
RQT6866
Basic operations
C
A
B
a
b
c
d
e
DIGITAL
S.WOOFER
AV EFFECT
SLEEP
CH SELECT
3D AI
PROGRAM
1
23
4
56
7
890
CANCEL
DISC
VCR/AUX/
6CH INPUT
TAPE/
DECK 1/2
SUPER
SOUND EQ
TUNER/
BAND
2/;
1∫
MUTING
j
VOLUME
i
EQ
Î
PRO LOGIC
SUPER SRND
TEST
Í
CD
DISPLAY
X
sALBUM
W
S10/-/--
[
4
]
[
5
]
CDs
See page 8 for basic CD play.
ªA
CD selection
Choose discs with this mark (a).
TwiceOnceTwice
Track
Current position
Once
Track Track
Note on CD-R and CD-RW
This unit can play CD-R/RW (audio recording disc) recorded with
CD-DA, WMA (SC-EH790) or MP3 (SC-EH790). Finalize§ the disc
after recording.
§A process that allows play on compatible equipment.
[EH790]
See page 14 for details about WMA and MP3.
8 cm CD
12 cm CD
ªB Setting the time
This is a 24-hour clock.
The example shows how to set the clock for 16:25 (4:25 p.m.).
1 Press [Í/I] to turn the unit on.
2 1 Press [CLOCK/TIMER] to display “CLOCK”.
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^------------------------------------------------------------}
2 Within 5 seconds
Press [SET].
3 1 Press [TUNING (X or W)] to set the time.
The time display can be changed in one minute units by tapping
the buttons, and quickly by holding down the buttons.
2 Press [SET].
The time is set and the original display is restored.
Displaying the clock
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Reset the clock regularly to maintain accuracy.
[A] Turning DEMO off
A demonstration of the display is shown if you have not set the
clock.
You can reduce the power consumed in standby mode by turning
the demonstration off.
While the unit is on:
Press and hold [–DEMO] until “NO DEMO” is
displayed.
Each time you press and hold the button:
NO DEMO (off)bDEMO (on)
B
1
2
3
123
Í/I
CLOCK/
TIMER
SET
SET
1
2
1
2
A
sDEMO
s
DEMO
TUNING
Do not;
≥use irregularly shaped discs (b).
≥attach extra labels and stickers.
≥use discs with labels and stickers that are coming off or with adhesive
exuding from under labels and stickers (c).
≥attach scratch-proof covers or any other kind of accessory.
≥write anything on the CD.
≥clean CDs with liquids. (Wipe with a soft, dry cloth.)
≥use CDs printed with label printers available on the market.
ªB
To prevent damage
Always observe the following points.
≥Load only 1 CD per tray (d).
≥Load CDs as shown in figure (e).
An adaptor is not needed with 8 cm CDs (singles).
≥Set the system on a flat, level surface.
≥Always unload all CDs before moving the system.
Do not;
≥set it on top of magazines, inclined surfaces, etc.
≥move the system while tray is opening/closing, or when loaded.
≥put anything except CDs in trays.
≥use cleaning CDs or CDs which are badly warped or cracked.
ªC
Skipping and searching through tracks
Skipping tracks
Press [4] (backward), or [5] (forward).
Skipping albums [EH790] (WMA/MP3 only)
Press and hold [4] (backward), or [5] (forward) on the main
unit.
Press and hold [–ALBUM (X or W)] on the remote control.
Searching through tracks
During play
Press and hold [4] (backward), or [5] (forward).
Note
≥Skipping is done in the selected order in program play (➡ page 15).
≥You cannot skip to tracks already played in random play
(➡ page 16).
≥You can search only within tracks in program and random play.
[EH790] (WMA/MP3 only)
≥You cannot search through tracks.