Filter
Top Products
TASCAM CD-RW900MKII 11
2 − Features of the CD-RW900MKII
Front panel
1
POWER switch The power switch is used to switch
the unit on and off.
2
Disc tray Discs should be placed label side upwards
in the disc tray. When a disc is loaded into the unit, the
display shows TOC Reading for a short period while
the unit determines the contents of the disc.
3
MENU key Use this key to call up the menu options
(see “Operation basics” on page 16).
4
OPEN/CLOSE key Use this key to eject the currently
loaded disc. The display shows Disc Eject.
5
REPEAT key Use this key to set the repeat playback
mode on and off.
6
ESCAPE key When in a menu mode, this key cancels
the menu item selected.
7
DISPLAY key Use this key to see the current disc title
when the disc is stopped. When the disc is playing or in
ready mode, press this key to see the current track title.
8
TIME key Use this key to cycle through the time
modes shown on the display (see “Time display switch-
ing” on page 20).
9
REMOTE SENSOR This is the sensor for the remote
control unit. Make sure that there is a clear path from
the remote control unit to the sensor.
0
Display The display is used to show the current status
of the unit, as well as the current menu settings.
q
TIMER switch (PLAY, OFF) Using this key switches
Timer play on and off. See “Timer playback” on page
20 for details.
w
INPUT (L,R) controls Use these concentric controls to
adjust the level of the analog audio signals received at
the ANALOG IN jacks.
e
PHONES jack and the level control Use a standard
pair of stereo headphones, equipped with a 1/4-inch
plug, with this jack.
Adjust the volume from the jack with the level control
(turn clockwise for higher volume).
r
MULTI JOG dial Use this dial to select tracks for play-
back, to set parameter values.
In addition, pushing the dial acts like an ENTER key, i.e.
the currently-displayed value or setting is confirmed.
t
FINALIZE/INS key Use this key to finalize recordable
discs (see “Finalizing” on page 28).
It also acts like a space key when entering TEXT data
(see “Title input operation” on page 30).
y
ERASE/DEL key Use this key (with CD-RW discs
only) to erase tracks, or a whole disc, or to refresh
a “bad” disc, or to unfinalize a finalized disc (see
“Erasing” on page 29 for details).
It also acts like a delete key when entering TEXT data
(see “Title input operation” on page 30).
u ∆
/
˙
key Use this key to operate review playback
(search) while in playback or ready modes.
When Directory search is on, and when stopped, using
this key selects the directory.
This key also moves the cursor in the left direction
when entering TEXT data.
i
˚
/
¥
key Use this key to operate cue playback
(search) while in playback or ready modes.
When Directory search is on, and when stopped, using
this key selects the directory.
This key also moves the cursor in the right direction
when entering TEXT data.
o
STOP key Use this key to stop playback or recording.
p
PLAY key Use this key to start or resume playback
or recording.
a
PAUSE key Use this key to standby for playback
or recording.
s
RECORD key Use this key to enter record ready mode
(see “Basic recording” on page 24 for details) and also
to enter manual track divisions (see “Manually divide
track” on page 27).