Filter
Top Products
Be Aware of the Working Environment
Avoid long-term
operation in very hot or
very cold weather.
Reduce the risk of
bystanders being
by flying debris. Make
sure no one is within 50
feet (15 meters)--that's
about 16 paces--of an
operating attachment.
Make sure bystanders or observers
outside the 50-foot "danger zone" wear
eye protection.
50
FEET
When operating in rocky terrain or near
electric wires or fences, use extreme
caution to avoid contacting such items
with the cutting attachment.
Be extremely careful of
slippery terrain, especially
during rainy weather.
Always make sure the appropriate
cutting attachment shield is correctly
installed.
Figure 2
Safety Labe|s
Be constantly alert for objects and debris
that could be thrown either from the
rotating cutting attachment or bounced
from a hard surface.
If contact is made with a hard object,
stop the engine and inspect the cutting
attachment for damage.
E4-S3000
Figure 3
This label indicates the minimum
distance between front handle
and rear grip perANSI B175.3.
Safety and Operation Information La-
bels: Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available, Contact
Swisher Inc. at (800) 222-8183, or go to
www.swisherinc.com for assistance. You
may also contact Swisher at the address
printed on the back of this Manual.