Filter
Top Products
6
4
POSITION THE REMAINING 4’X5’ PATIOS
Take the next 4’x5’ patio and position it next to the previous patio. Place the ledge
section of the patio over the top plates.
Attach one long post to the back side corner using the 2” screws and hex nuts as shown.
Fasten the deck sections together using the 1” Truss Head screws, Washers, and hex nuts as shown.
Only hand tighten the screws at this time.
Repeat this process for all 4’x5’ Patios.
CLOSE-UP #3
HEX
NUTS
2” SCREWS
LONG POST
HEX NUTS
WASHERS
1” SCREW