Filter
Top Products
5
3
Start Here
or Here
POSITION YOUR FIRST DECK SECTION
Starting at the fi rst or last (left or right) vertical of the straight side of the pool, place the
Ledge section of a 4’x5’ patio over the two top plates as shown Close Up #1.
Attach two long posts to the back side of the deck using the 2” screws and hex nuts as
shown in Close Up #3.
Only hand tighten the screws at this time.
If your deck has only one 4’x5’ patio as on the 18x12 Side deck,
proceed to step 5 now.
CLOSE-UP #3
HEX
NUTS
2” SCREWS
LONG POST
CLOSE-UP #1