Filter
Top Products
6 ► HP TWIN8 User Manual
• Warning: Hydraulic uid under pressure could cause
skin injection injury. If you are injured by hydraulic
uid, get medical attention immediately.
• Be observant of the hydraulic hoses lying about the
work area, they can be a tripping hazard.
• Use proper lifting techniques when handling the
power unit, and do not over-reach.
• Only use the Power Unit in well-ventilated areas. DO
NOT operate in explosive atmospheres, in closed
environments or near ammable substances.
• Always be well-rested and mentally alert when op-
erating the Power Unit and tools. DO NOT operate if
affected by medications, drugs or alcohol.
• Keep clear of hot (engine) parts and exhaust.
• Do not operate tools if oil temperature exceeds 140
°F/60 °C. Operation at high temperatures can cause
higher than normal temperatures at the tools which
can result in operator discomfort or injury.
• Disconnect battery before servicing electrical com-
ponents. Electrocution or burns could result from
improper contact.
• Loading and unloading of the power unit is danger-
ous. Never attempt to load or unload the power unit
without loading ramps, loading dock or an over head
crane. Loading ramps must be strong enough, have
a low angle, and correct height. Load and unload the
power unit on a level surface. Never attempt to load
or unload the power unit if the ramp incline exceeds
15 degrees. Failure to follow these instructions may
result in serious injury or death.
• Warning: Use of this tool on certain materials
during demolition could generate dust potentially
containing a variety of hazardous substances
such as asbestos, silica or lead. Inhalation of dust
containing these or other hazardous substances
could result in serious injury, cancer or death.
Protect yourself and those around you. Research
and understand the materials you are cutting.
Follow correct safety procedures and comply with
all applicable national, state or provisional health
and safety regulations relating to them, including,
if appropriate arranging for the safe disposal of the
materials by a qualied person.
SAFETY PRECAUTIONS