GTR20 User Manual ◄ 19
Engine: ............................................................................................................................18 hp Briggs / 20 hp Honda
Capacity (Flow)...............................................................Two 5 gpm/19 lpm Circuits or One 10 gpm/37.8 lpm Circuit
Length:................................................................................................................................................ 36 in. / 91.4 cm
Width: ................................................................................................................................................. 23 in: / 58.4 cm
Height: .............................................................................................................................................. 29.5 in. / 74.9cm
Weight (Wet): Dual Circuit Briggs ...................................................................................................334 lbs / 151.5 kg
Weight (Wet): Dual Circuit Honda ..................................................................................................352 lbs / 159.6 kg
Fuel Tank Capacity: ........................................................................................................................... 5.5 gal. / 20.8 ltr
Estimated Gas Consumption Per Hour ...................................................................................................1.3 gal / 4 ltr
Hydraulic Reservor Capacity: .................................................................................................................. 3 gal. / 11 ltr
Nominal Operating Pressure .......................................................................................................... 1500 psi / 103 bar
Relief Valve "crack" setting ............................................................................................................. 2100 psi / 145 bar
Full relief setting .............................................................................................................................2500 psi / 172 bar
EHTMA Category........................................................................."C" (19 lpm @ 103 bar) or "E" (37.8 lpm @ 103 bar)
HTMA Category............”Type 1” (4-6 gpm /15-23 lpm @ 103 bar) or “Type RR” (9-10.5 gpm / 34-40 lpm @ 103 bar)
POWER UNITS,TRACHORSE & GAS/FUEL DRIVEN EQUIPMENT:
A1. Federal Emission Component Compliance 40CFR part 1060.120 Stanley warrants all fuel system emission com-
ponents for 2 years from the date of original purchase provided there has been no abuse, neglect, modi cations, or
improper maintenance.
Components covered. The emission-related warranty covers all components whose failure would increase the evapora-
tive emissions. Your emissionrelated warranty does not cover components whose failure would not increase evapora-
tive emissions. Coverage under this warranty extends only to the following parts; fuel tank, fuel cap, fuel hose and vapor
hose from the fuel tank to the engine and any connectors that are apart of the fuel system.
The equipment is designed, built, and equipped so it conforms at the time of sale to the ultimate purchaser and each
subsequent purchaser and is in compliance with 40 C.F.R. 1060.120 standards. The equipment is free from defects in
materials and workmanship that may keep it from meeting these requirements.
EMISSIONS
SPECIFICATIONS