Filter
Top Products
19
30SS, 36SS, 45SS
Rev: 12/21/2011
Item Procedure
Time Interval
Break-in
(first 5 hrs)
Every 8 hrs
(daily)
Every 40 hrs
(weekly)
Every 100 hrs
(Bi-weekly)
Every 200 hrs
(monthly)
Belts
Inspect Tension
(adjust if needed)
X X
Augers/Impeller Inspect
X
Engine Air Filter Inspect X
Engine Oil
Check X
Change 20-30 hrs
Engine Spark Plug Inspect 20-30 hrs
Fuel Line Check
X
Hardware
Check for proper
tightness
X X X
X X
Snow Blower Main
Frame
Remove debris from
under belt cover
Safety Interlock System
Check Operations
and Switches
X
Tires Check Air Pressure
X
Augers/Impeller Brake
X
Cleaning the Snow blower
It is recommended that the STANLEY snow blower be cleaned on a daily basis. Excessive accumulation of dirt,
debris, oil, etc. on the muffler, air filter, snow blower augers/impeller and engine may present a potential safety
hazard.
Maintenance Schedule