Filter
Top Products
33
Installation
ES GB
Install Weight Carrier
1. Install the weight carrier (A, Figure 54) onto the
front of the unit and secure with the 3/8-16 x 1-
1/4” bolts (C), 3/8” washers (B) and 3/8-16” nylock
flange nuts (G).
NOTE: Use top holes in the weight carrier for the
IS2000Z Series (as shown in Figure 54).
2. Install the counter weights (D) in the weight carrier
and secure with the retaining pin (E) and hairpin
clips (F).
Figure 54. Install Weight Carrier
A. Weight Carrier
B. 3/8” SAE Washer
C. 3/8-16X1-1/4” Bolt
D. Weight
E. Retaining Pin
F. Hairpin Clip
G. 3/8-16 Nylock Flange Nut
A
B
D
F
E
C
G