Filter
Top Products
5
SECTION 1 - FAMILIARIZATION
1.1 INTRODUCTION
This manual has been prepared for the operators of the
SNAPPER 73” Finishing Mower. Its purpose, aside
from recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 and 3 of this manual, ALL
Safety messages on the 73” Finishing Mower and all
Safety messages which accompany and are attached
to your tractor.
1.2 NOMENCLATURE
The nomenclature information above, shows specific
components of the SNAPPER 73” Finishing Mower. It is
recommended that all operators of this equipment
become thoroughly familiar with the controls,
components, and operation of the mowing equipment
before operating the mower. Driveline information is
also found in the separate driveline owner’s manual.
Study all equipment manuals before operating the
mower and keep all manuals handy for future
reference.
GEAR BOX
BELT/SPINDLE
COVER
DEFLECTOR
TOP HITCH
LINKS
PIVOTING
HITCH
COUPLING
RING
DRIVELINE
CUTTING
HEIGHT
SPACERS
CASTER
WHEEL
LYNCH PIN
MOWER
DECK
DRIVESHAFT GUARD
REAR HITCH BARS
FRONT HITCH
BARS