Filter
Top Products
Step 10: See Figure 10:
Install Rear Curtain (15).
A. Lay the rod sewn into the vinyl over the rear
of the Top Frame. Close the snap flaps at the
corners.
B. Close the snap flaps over the Rear Posts
and Rear Cross Bar.
C. Secure the ties to the Rear Cross Bar.
D. Place a notched Plastic Protector over the
bent ends of each rear post. (See inset)
Step 10: See Figure 10:
Install Doors and Top (18).
A. Install doors per the instructions in the door
hardware package. Connect the hook and loop
fastener strips on the lower door & front panel.
B. Make sure that the rods sewn into the
windshield and rear curtain are lying over the
top frame. Place the top over the top frame.
C. Place four1/4” flat washers over each of four
bolts. Insert bolts inwards add locknuts and
tighten.
15
Figure 10
Figure 10
18
10