Simplicity SCE Yard Vacuum User Manual


 
7
Connect accessory hose to hose coupler
(fig 1) and hose port (fig 2) located at front of
machine.
Connect accessory tool to coupler and hose
cuff on the other end of the hose (fig 3).
Turn main power switch on.
To clean stairs or upholstery, squeeze trigger
on accessory tool to release solution.
Release trigger and continue to pull tool
over surface to pick up excess solution.
Note: When cleaning upholstery, always
check cleaning instructions sewn in
furniture by the manufacturer.
After cleaning, squeeze trigger for ve
seconds after turning main power switch off
to relieve water pressure from tool before
disconnecting hose.
Attachment Cleaning
Figure 1
Figure 2
Figure 3