Filter
Top Products
6
Operation
For Safety: Do not operate machine unless
operator manual is read and understood.
• Vacuum carpet thoroughly and remove
other debris.
• Turn main power switch on.
• To begin cleaning carpets, push button on
handle with thumbs and slowly pull machine
backward (fig 1).
• Release handle button at end of path and
continue to pull machine backward to pick
up excess solution.
• Tip machine back on wheels and push
machine forward to begin next path.
While operating the machine
• Overlap each path by 2 inches.
• Work away from outlet and power cord to
prevent cord damage.
• Periodically check for excessive foam
buildup in recovery tank.
Attention: Excessive foam buildup will not
activate the float shut-off screen.
• If brush stops, the circuit breaker may have
been tripped. Unplug power cord and
check brush for obstruction. Push brush
reset button to resume (fig 2).
• To clean heavily soiled areas, repeat cleaning
path from a different direction.
• When the unit is no longer dispensing
cleaning solution or the recovery tank is
full, empty the recovery tank and fill
solution tank (see “Draining Tanks”).
Figure 1
Figure 2