Filter
Top Products
11
Problem Solving Guide
Problem
Cause
Solution
If machine is leaking
If you hear a louder,
higher-pitched motor noise
There is no fluid in the clear drain
hose, or there is no solution on
your carpet
If there is no solution on your
carpet
The drain hose is loose.
Check to ensure the solution tank
drain hose (clear tube) is securely
connected.
Solution tank is empty.
Empty recovery tank, refill solution
tank and make sure the ball in the
float shut-off screen is moving freely,
not jammed.
Solution tank is low or empty.
Refill the solution tank.
The two spray tips on the bottom of the extractor
are clogged.
Locate the two spray nozzles on the
bottom of the machine (they are
located up and behind the brushroll).
Rotate each nozzle 1/4 turn, and pull
the nozzle off the machine. Poke a
straight pin through the hole to unclog
the tip. Remove debris. Rinse nozzle,
then reattach.
Any other service should be done by an Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at www.simplicityvac.com
Any other service should be done by an Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at www.simplicityvac.com
Any other service should be done by an Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at www.simplicityvac.com
Helpful Hints
Please check each item below if you have trouble with the carpet extractor.
Unplug the carpet extractor from the power supply before servicing.