Filter
Top Products
10
Problem
Cause
Solution
Machine does not operate
Brush motor does not operate
Solution pump does not operate
Poor solution pick-up
Extractor not plugged in.
Plug in unit.
Main on/off switch not turned to the on
position.
Turn machine on.
Building circuit breaker tripped.
Unplug machine from wall outlet.
Check and reset circuit breaker in
building. Plug in machine and turn on
to operate. If building circuit breaker
trips again, discontinue use.
Brush motor circuit breaker tripped.
Let motor cool and reset brush motor
breaker button at rear of machine.
Solution pump circuit breaker tripped.
Let pump cool and reset pump
breaker button at rear of machine.
Button on handle not pushed.
Push solution button on handle.
Pulling machine too fast.
Slow down cleaning process.
Clogged float shut-off screen.
Open recovery tank cover and clean
lint off screen.
Accessory tool vacuum hose port cover
is loose or missing.
Check vacuum hose port cover.
Any other service should be done by an Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at www.simplicityvac.com
Any other service should be done by an Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at www.simplicityvac.com
Any other service should be done by an Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at www.simplicityvac.com
Problem Solving Guide
Troubleshooting
Please check each item below if you have trouble with the carpet extractor.
Unplug the carpet extractor from the power supply before servicing.