Filter
Top Products
20
www.simplicitymfg.com
Operation
Zero-Turn Driving Practice
The lever controls of the Zero Turn rider are responsive,
and learning to gain a smooth and efficient control of the
rider’s forward, reverse, and turning movements will take
some practice.
Spending some time going through the maneuvers shown
and becoming familiar with how the unit accelerates,
travels, and steers — before you begin mowing —is
absolutely essential to getting the most out of the Zero
Turn rider.
Locate a smooth, flat area of your lawn — one with
plenty of room to maneuver. (Clear the area of objects,
people and animals before you begin.) Operate the unit at
mid-throttle during this practice session (ALWAYS operate
at full throttle when mowing), and turn slowly to prevent
tire slippage and damage to your lawn.
We suggest you begin with the Smooth Travel procedure
to the right, and then advance through the forward,
reverse, and turning maneuvers.
You must release the parking brake prior to moving the
control levers inward.
Basic Driving
Forward Travel Practice
Gradually move both ground speed control levers — evenly
FORWARD from neutral. Slow down and repeat.
NOTE: Straight forward travel takes practice. If necessary,
top speed can be balance-adjusted — see the Speed
Balancing Adjustment in the Adjustments section near the
back of this manual.
Reverse Travel Practice
LOOK DOWN & BEHIND, then gradually move both ground
speed control levers evenly BACK from neutral. Slow down
and repeat.
NOTE: Practice backing up for several minutes before
attempting to do so near objects. The rider turns sharply in
reverse as well as forward, and backing up straight takes
practice.
Figure 8. Forward Travel Figure 9. Reverse Travel
Smooth Travel
The lever controls of the
Zero Turn rider are
responsive.
The BEST method of
handling the ground speed
control levers is in three
steps — as shown in Figure
7.
FIRST place your hands
onto the levers as shown.
SECOND, to go forward
gradually push the levers
forward with your palms.
THIRD, to speed up move
the levers farther forward.
To slow down smoothly,
slowly move the levers
toward neutral.
Figure 7. Move Control Levers
Gradually
Reverse
Travel
Forward
Travel