Filter
Top Products
INSTALLATION INSTRUCTIONS
EXHAUST SHIELD KIT
MFG. NO. 1666610
1.
Raise the seat deck to expose the right-hand top
duct.
2.
See figure 1. Cut out the template below and place
it on the duct with the edges aligned. Tape the
template in place and drill out the holes as indicat-
ed using a
13/W
drill bit.
Figure 1. Placing Template for drilling holes
3.
See figure 2. Install the front exhaust shield and
rear exhaust shield using the hardware supplied
with the kit. Tighten securely.
Figure 2. Installing Exhaust Shields
A. Front Exhaust Shield, (triangular)
(sty.
1)
B. Rear Exhaust Shield, (square)
C. Screw, Truss Hd., MO-32 x
l/2
D. Nut, Hex, w/washer,
#lo-32
Exhaust Shield Mountlng Template
FORM 1713321
PRINTED IN U.S.A.
12/93-300-VP