Shindaiwa DG250MI Portable Generator User Manual


 
- 12 -
When the battery fluid level is low, Battery Fluid Monitoring Lamp will flash.
If the lamp is flashing, quickly add some distilled water. (refer to 8.6 Checking Battery)
5.1.6 Fluid Level Monitoring Lamp [DG250MI only]
!
Caution
: Fire
This equipment uses Diesel fuel as a fuel. When refueling, always stop the engine, and
keep away from fire. Moreover, always wait until the engine cools down before
refueling.
Always wipe any drip of Diesel fuel or oil. Do not use this equipment when a leak is
found. Repair the equipment before use.
When the fuel level reaches less than 1/4 tank, Fluid Level Monitoring Lamp will flash.
If the lamp is flashing, add fuel.
<Caution>
Just after the engine started, lamp will not flash promptly even in the event of
1/4 tank level fuel, which is not malfanction.
5.2 Gauges
5.2.1 Tachometer [DG250MI only]
Tachometer displays the revolution of engine and the generator.
The frequency of the generator is 50Hz at 1500min
-1
and 60Hz at 1800min
-1
.
5.2.2 Hour Meter
Hour Meter keeps track of utilization time. Use this meter to schedule your Preventative
Maintenance. Note that the Hour Meter will operate, as long as the start switch is in ON
position, regardless of whether the engine is perating or stopped.
<Caution>
DG250MI incorporates Hour Meter in Tachometer.