Servis-Rhino 2160 Brush Cutter User Manual


 
OPERATION
2160 02/10 Operation Section 4-25
© 2010 Alamo Group Inc.
OPERATION
8.3 Driving the Tractor and Boom
Inspect the area to be mowed before beginning operation. Identify any drop-offs, slopes, holes, hidden
obstructions or similar obstacle that could cause the tractor to loose stability and potential roll-over. Mark and
avoid the item or the entire area.
Start off driving at a slow speed and gradually increase your speed while maintaining complete control of the
tractor. Never operate the tractor at speeds that cannot be safely handled or which will prevent the operator
from stopping quickly during an emergency. If the power steering or engine ceases operating, stop the tractor
immediately as the tractor will be difficult to control.
Perform turns with the tractor and mower at slow
speeds to determine how the tractor with and
attached implement handles a turn. Determine the
safe speed to maintain proper control of the tractor
when making turns. When turning with the
implement the overall working length and width of
the unit is increased. Allow additional clearance
for the unit when turning or when passing large
obstructions.
DO NOT BACKUP WITH HEAD IN MOWING
POSITION.
To avoid overturns, drive the tractor with care and
at safe speeds, especially when operating over
rough ground, crossing ditches or slopes, and
turning corners. Use extreme caution when
operating on steep slopes. Keep the tractor in a
low gear when going downhill. DO NOT coast or
free-wheel downhill.
OPS-B- 0006_F
Never Leave the mower unattended while the head is in the raised
position. The mower could fall causing serious injury to anyone who
might inadvertently be under the mower
. (SBM-4)