Filter
Top Products
OPERATION
1598 01/11 Operation Section 4-29
© 2011 Alamo Group Inc.
OPERATION
LOWERING THE BUCKET
After bucket is dumped, back away from vehicle
while lowering and rolling back bucket.
OPERATING WITH FLOAT CONTROL
During hard surface operation, keep bucket level
and put lift control in float position to permit bucket
to float on working surface. If hydraulic down
pressure is exerted on bucket, it will wear faster
than normal.
Float will also prevent mixing of surface material
with stockpile material. Float position will reduce
the chance of surface gouging when removing
snow or other material.