Filter
Top Products
MAINTENANCE
ENGINE LUBRICATION
Your four cycle Engine will normally consume some oil,
therefore check Engine oil level regularly--approximately
every five hours of operation and before each usage. Stop
Engine and wait several minutes before checking oii level,
With Engine level the oil must be even with oil fill(Fig. 24),
Change Engine oil after the first two hours of operation
and every twenty five hours thereafter or at the beginning
of every tilling season.
• Drain oil while Engine is warm,
• Remove Oil Drain Ptug (Fig 24)
. T_pTiller forwardand catch oil in a suitable container,
• When Engine isdrained of all oil, replace Oil Drain Ptugo
• Refill with fresh SAE 30 or SAE 10W-30 weight oil.
TRANSMISSION
Your Transmissionissealed and will onlyrequire lubri-
cation ifserviced_
FINISH
Keep your Tiller finish and Wheels free of gasoline, oil,
etc_Protectpainted surfaceswith automotive typewax.
OIL
DRAIN
PLUG
OIL
LEVEL
OIL FILLER
PLUG
FIGURE 24
15