Filter
Top Products
ASSEMBLY
PARTS IDENTIFICATION
COVER
UPPER CHUTE
FULL
BAGGER
INDICATOR
CHUTELATCH
GRASS
CATCHER
CONTAINERS
%,
\
LOWER CHUTE _ "_'_ LOWER CHU'_ E
ATTACHING
STRAPS
NOTE: When righthand (R H.) and left hand (L.H.) are mentioned inthis man ua, tmeans when you are seated onthe tractor,
in the operator's position_
THESE ARE THE TOOLS YOU WILL NEED TO
ASSEMBLE YOUR GRASS CATCHER:
(1) 3/8" Wrench
(1) 1/2" Wrench
(2) 9/16" Wrenches
(1) 1/2" Socket
(1) 9/16" Deep well Socket
(1) Drive Ratchet
(1) 3" or longer Extension
(1) Short Handle
Phillips Screwdriver'
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift/motion control lever in "NEUTRAL" position.
° Place attachment clutch in "DISENGAGED" position,
• Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving parts have completely stopped,
• Disconnect spark plug wire from spark plug and place wire where it cannot come in
contact with plug,
6