Filter
Top Products
ASSEMBLY
o
e
CHUTE LATCH ASSEMBLY
(See Fig. 10)
Use Hardware - - GROUP "E & F"
Assemble latch pin to upper chute, as shown.
Assemble rubber latch to lower chute, as shown..
Tighten all hardware securely.
#10 x 1-1/8" SCREW
WASHERS
3/16 x 3/4 x 16 Ca.
UPPER CHUTE
#10 x 5/8"
SCREW
LOWERCHUTE.-----------
SPLIT
SPACER
I/ACORN NUT
RUBBER
LATCH
WASHER /
3/16x3/4x16 Ca.
WELD
LOCK WASHER
Fig. 10
UPPER CHUTE (See Fig. 11 &12)
No hardware required
• Lower mower deck to its lowest cutting position
, Assemble upper chute by inserting curved end into
hole in back of cover,
NOTE: Handle carefully so as not to damage full bagger
indicator_
• Push in and turn upper chute until itis in line with lower
chute.
a
o
Align the bosses on lower chute with alignment slots on
upper chute and slide together.
Secure with rubber latch by hooking hole in latch over
latch pin.
FULL BAGGER
UPPER INDICATOR HANDLE
Fig. 11
ALIGNMENT
SLOT
o_J
LATCH PIN
Fig. 12
LEVEL MOWER DECK
No hardware required
. Be sure deck isproperly leveled for best mower perfor-
mance See your tractors owner's manual for instruc-
tions
10