Filter
Top Products
OPERATION
HOW TO USE YOUR WASHER
IF YOU HAVE ANY PROBLEMS OPERATING YOUR
PRESSURE WASHER. PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222-3136.
STOPPING YOUR PRESSURE WASHER
o First, move engine throttle lever to"OFF" position(Fig.
9).
I
OFF, IDLE FAST
l
FIG. 9
o Simply shutting OFF engine will not release pres-
sure In the system. Pullthe trigger on the spray wand
assembly to relieve the pressure in the hose.
NOTE: A small amount of water will squirt out when you
release the pressure.
SPRAY NOZZLES
Your high pressure washer comes equipped with an adjust-
able nozzle (Fig. t2)o Attach nozzle as shown in Fig. 10
and HAND TIGHTEN the plastic knob. Figure 12 shows the
optional turbo nozzle.
HOW TO USE ADJUSTABLE NOZZLE
A
WARNING: NEVER ADJUST SPRAY PATTERN
WHENSPRAYING. NEVERPUTHANDSINFRONT
OF SPRAY NOZZLE TO ADJUST SPRAY PAT_
TERN.
ADJUSTABLE NOZZLE
OPTIONAL TURBO NOZZLE
FIG. 10 FIG, U
With the adjustable nozzle you can adjust the spraypattern
to be either high pressure or low pressure. You can also
adjust the spray so it isconcentrated ina stream pattern or
expanded into a fan pattern. Use this nozzle to apply
detergent°
= Push the nozzle attachment forward when you wish to
adjust the spray to low pressure mode (Fig, 12). Push
the nozzle backward to achieve high pressure.
• Twisting the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream,
• You can also adjust the pressure by turning the pres-
sure control knob (Fig, 13) to the desired pressure
setting. Turning this knob all the way clockwise pro-
duces the highest pressure Do not unscrew the pres-
sure control valve more than 3 turns, tt will come off.
PRESSURE
CONTROL
KNOB
FIG. 13
NOZZLE IN HIGH
PRESSURE MODE
PUSH NOZZLE FORWARD FOR
LOW PRESSURE MODE AND DE-
TERGENT APPLICATION
TWIST NOZZLE TO
EXPAND SPRAY
TWIST NOZZLETO NARROW
SPRAY STEAM
FIG. 12
10