Filter
Top Products
12
CHECK FOR LOOSE FASTENERS
• Before each use make a thorough visual check of
the spreader for any bolts and nuts which may have
loosened. Retighten any loose bolts and nuts.
CHECK FOR WORN OF DAMAGED PARTS
• Check for worn or damaged parts before each use.
Repair or replace parts if necessary.
CHECK TIRE INFLATION
• Check if tires are adequately inated before each
use. Do not inate beyond maximum recommended
pressure.
Service Dates
Before each use
After each use
Every season
Before storage
As instructed
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Check for loose fasteners X
Check for worn or damaged parts X X
Check tire ination X
Cleaning X X
Lubricate X X
CUSTOMER RESPONSIBILITIES
• Read and follow the maintenance schedule and the maintenance procedures listed in this section.
MAINTENANCE/STORAGE
FIGURE 18
STORAGE
• Rinse inside of hopper and exterior of spreader and
dry off before storing.
• Store in a clean, dry area.
CAUTION: DO NOT inate tires beyond
the maximum recommended pressure
printed on side of tire.
CLEANING
• Rinse inside of hopper and exterior of spreader and
dry off before storing.
LUBRICATE (See gure 18.)
• Lightly apply automotive grease as needed to the
sprocket and gear.
• Oil the nylon bushings on the vertical sprocket shaft
and on the axle at least once a year, or more often as
needed.
• Oil right hand (idler) wheel bearing at least once a
year or more often as needed.
GREASE
OIL
OIL