Filter
Top Products
12
1/4" x 3/4" HEX BOLT
1/4" LOCK NUT
1/4" x 3/4"
HEX BOLT
1/4" LOCK
NUT
2ND ROD
3RD ROD
1/4" x 1-1/4"
HEX BOLT
1/4" LOCK
NUT
8. Attach the lower support rod closest to front support tube
to the outside of the top angle support using two 1/4"
x 3/4" hex bolts and 1/4" lock nuts. DO NOT TIGHTEN
YET. See gure 24.
NOTE: Cart bag not shown for clarity.
9. Attach the second lower support rod to the outside and
the third lower support rod to the inside of the top angle
support using two 1/4" x 3/4" hex bolts and 1/4" lock
nuts. DO NOT TIGHTEN YET. See gure 25.
NOTE: Cart bag not shown for clarity.
FIGURE 24
FIGURE 25
10. Attach the braces to the front support tube using two
1/4" x 1-1/4" hex bolts and 1/4" lock nuts. DO NOT
TIGHTEN YET. See gure 26.
NOTE: Cart bag not shown for clarity.
FIGURE 26
1/4" x 1-1/4" HEX BOLT
1/4" LOCK NUT
FIGURE 23
7. Secure front support tube to top angle support using
two 1/4" x 1-1/4" hex bolts and 1/4" lock nuts. DO NOT
TIGHTEN YET. See gure 23.
NOTE: Cart bag not shown for clarity.