Filter
Top Products
DESCRIPTION cont.
13
Safety Guard
Edge Guide
Wheels
Cutting Line
Trimmer Head
Motor
Housing
Air
Vents
KNOW YOUR CORDLESS TRIMMER cont. (Fig. 2)
Fig. 2
Trimmer Head 5-position
Adjustment Button
Top Black Locking Collar
for Adjusting Length of Shaft
Adjustable Telescopic
Top Shaft also Rotates
180
°
for Edging
18-Volt
Battery Pack
Trigger
Switch
Trigger Switch
Handle
Safety “On” Button
Auxiliary Handle
Auxiliary Handle
Adjusting Knob
Bottom Black Locking Collar
for Rotating Top Shaft 180
°
DESCRIPTION
12
KNOW YOUR CORDLESS TRIMMER (Fig. 2)
Safety, performance and dependability have been given top priority in the design of
this product, making it easy to maintain and operate.
This Cordless Trimmer has the following features:
1. 12-inch Cutting Path
2. 2 in 1: Trimmer and In-Line Edger with Two Wheels The cutting face can be
changed from horizontal to vertical. (i.e. For cutting edges). Pull Handle rotation
locking mechanism and turn the top of the shaft 180º counter-clockwise.
(The head will only move in one direction) The motor head will swivel through
180º-Release the collar and the shaft will lock-confirm secure before use!
3. 18 Volt Cordless / 8000 RPM (no-load speed) for efficient trimming and edging.
4. 18.0 Volt, 1.3Ah Lithium Battery Pack (No. CGT184LU-44) recharges in 3-5
hours under normal use.
5. Charger (No. CGT184LU-23) has 1 LED light. Connect the battery charger to
the power supply and the green light will illuminate.
Slide the battery pack into the
charger base to make the connections and the red light
will illuminate to show
charging has started. The red light will switch to green, which means the battery is
full, and charging is completed. Then press the battery pack release button and
remove your battery pack. Your battery pack is now ready for use.
6. Ergonomically Designed Rear Handle for maximum control and gripping
comfort with reduced operator fatigue.
7. Four finger Trigger Switch with Safety “On” Button. Safety On button must
be depressed to operate trigger switch.
8. 5-Position Trimmer Head easily adjusts to the desired working angle for
optimum operator control in all trimming and edging applications. From trimming
around hard-to-reach flower beds and shrubs, to deck supports, fences and
stairways, to edging sidewalks, driveways and landscaping.
9. Edge Guide Wheels provides a cutting guide for protecting flowers, plants,
screens and fences from being cut by trimmer line.
10. Adjustable Telescopic Shaft allows adjustments from 17 to 28 inches from
your ideal working height. Comfortably fits users that are 4 1/2 to 6 1/2 feet.
11.
Lightweight and Ergonomically Designed for easy use, handling comfort and
efficient
trimming and edging.
12.
Automatic Line Feed when line becomes worn, the hub will automatically feed
and trim
a new length of line.
13. Your trimmer uses: 0.065 inch diameter twisted line. Use Craftsman 85937
automatic feed replacement spool and line. It’s factory wound for maximum
reliability.
NOTE: Before attempting to use this product, familiarize yourself with all
operating features and safety rules.