Filter
Top Products
Cheetah 10K.7 SCSI Product Manual, Rev. D 65
9.6.1 DC cable and connector
LW model drives receive DC power through a 4-pin connector (see Figure 24 for pin assignment) mounted at
the rear of the main PCBA. Recommended part numbers of the mating connector are listed below, but equiva-
lent parts may be used.
LC model drives receive power through the 80-pin I/O connector. See Tables 16 and 17.
Type of cable Connector Contacts (20-14 AWG)
14 AWG MP 1-480424-0 AMP 60619-4 (Loose Piece)
AMP 61117-4 (Strip)