Filter
Top Products
Step 5: Secure upper Wood Shelf
Secure the Shelf Retainer (u) to the upper Wood Shelf (kk) by inserting a Wood Screw (i) through the Shelf Retainer and thread it into
the Wood Shelf. Secure the Shelf Bracket (v) to the upper Back Rail (dd) by threading a Phillips Pan Head Bolt (e) through the Shelf
Bracket and into the Back Rail (dd). See Diagram 5 for assistance.
Detailed View A
Diagram 5
v
dd
e
Detailed View B
u
i
Step 6: Add Hinge Cars
Add the Hinge Cars (z) by sliding them down the groove in the pillar of the Side Panel (ee). Make sure the widest part of the Hinge Cars
is facing the outside of the assembly. See Diagram 6 for assistance.
Detailed View
Diagram 6
z
ee