Filter
Top Products
29
FM Radio
To listen to the FM radio
1. Turn on the radio by press the Power button.
2. Press the Band button until the display shows <FM>.
To change FM stations
1. Press the Tuning+/- buttons to change the frequency.
2. Long press the Tuning+/- buttons to search for the next available
radio station.
FM RDS
The Radio Data System (RDS) is a system in which inaudible digital
information in addition to the normal FM radio program is transmitted.
Also the RDS radio station corrects the real time when it provides
this service.
The information display is only available when the station provides
R.D.S. service.
Press the REPLY/RDS button, to cycle through the various modes,
and wait for 2 seconds to see the information. The information in the
various modes are
1. Frequency: Displays frequency of the station.
2. Program Service: Displays name of station.
3. Radio Text : Displays ratio text messages such as news items etc.
4. Program Type: Displays the program type.
Storing a FM radio station in a preset
There are 5 memory presets available.
1. Select the required station as previously described.
2. When the radio is playing, press and hold 1 of the 5 preset buttons
that you wish you store. The station will be stored under this
chosen preset.
3. Repeat this procedure for any other preset memories that you wish
to configure.
Recalling an preset Internet radio station
When the radio is playing, press 1 of the 5 preset buttons that you wish
to recall. The radio will connect to the station stored in preset memory.
Note:
If you have not previously stored a radio station in the selected preset,
your current radio station will continue to play.