Filter
Top Products
5
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
Safety Alert Symbol
Read Your Operator’s Manual
Wear Eye and Hearing
Protection
Keep Bystanders Away
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand oper-ator’s
manual before using this product.
Wear eye protection which is marked to comply with ANSI Z87.1 as
well as hearing protection when operating this equipment.
50' 15m
Keep all bystanders at least 50 ft. (15 m) away.
Ricochet
Thrown objects can ricochet and result in personal injury
or property damage.
Blade Thrust
Beware of blade thrust. Products authorized for blade use will display
this symbol to warn of blade thrust.
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTER for repair. When servicing,
use only identical replacement parts.
WARNING:
SAVE THESE INSTRUCTIONS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
WARNING:
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator’s manual. If you do not understand
the warnings and instructions in the operator’s manual, do
not use this product. Call Expand-it customer service for
assistance.
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1.
SYMBOLS
DANGER:
WARNING:
CAUTION:
CAUTION: