Rover 5377 - 12HP Lawn Mower User Manual


 
SPECIFICATIONS
ROVER RANGER
Machine Model No. 5377
Engine Model No. 281707
Single Cylinder Briggs & Stratton
4 Stroke 12Hp 465cc
Fuel Capacity 4.0 Litres
Oil Capacity 1.42 Litres
Lubrication Gear Impellor
Spark Plug type Champion CJ8
Spark Plug gap 0.7 to 0.8mm
Ignition type Magnetron
Engine Oil 10w-30 or SAE 30
TRANSMISSION
Auto-Drive system consists of a continuous belt being driven
by an idler pulley over two drive pulleys and around a return
pulley. Friction plates are brought into contact with the drive
pulleys to impart either forward or reverse motion to rear
drive wheels by means of a drive selector pedal on the right
side of the machine.
Ground speed at 3600 rpm is variable due to Auto – Drive
system depending on pressure applied to drive selector
pedal.
Max. speed = 8.6 km/hr
CUTTING HEAD
Model 160 Full floating pressed steel housing with right
side discharge. Width of cut 760 mm (30”).
TYRES
Front Tyres: 4.1 x 6 Tube
Pressure 140 KPA maximum
Rear Tyres: 16 x 6.5 x 8 Tubeless
Pressure 96 KPA maximum
CONTROLS
Throttle control with Fast, Slow and Choke positions;
Key switch with Off, On and Start positions;
To emphasise special information the words WARNING and
CAUTION are used.
WARNING: The safety of the user and others
involved.
Personal injury may result should this
information be disregarded.
CAUTION: Follow these instructions carefully to
avoid mower damage and loss of
warranty.
STEERING WHEEL
325MM Dia. Steering Wheel. 1 ¼ turns lock to lock.
CLUTCH/BRAKE PEDAL
Foot operated pedal. Left side of machine.
PARKING BRAKE KNOB
Hand operated catch. Left hand side. Used in conjunction
with clutch/brake pedal.
DRIVE SELECTOR
Foot operated pedal located on right side of machine. Spring
loaded so as to return to neutral position.
CUTTING HEIGHT
Lever right hand side. 8 height of cut positions from 15mm
to 65mm.
CUTTER DRIVE
Lever located left side of seat cowl.
GENERAL
Wheel Base: 135cm Length: 164cm
Track 63cm. R 69cm F Width: 80cm
Turning Circle: 5.8m Height: 95cm
Turning Radius: 2.0m Weight: 195kg
2