Filter
Top Products
– 50 –
Caution :
The reel is disassembled with the spring still
assembled, so place it on a flat table without
dropping, or shaking.
Retaining-ring C
Retaining-ring
pliers
(2) Remove the small parts.
-1 Hold the case, and remove the retaining-ring C
with the ring pliers.
-2 Beginning at the top, remove the retaining-ring,
friction plate, and ratchet.
Disassembly is completed.
(3) Remove the reel.
-1 Move the reel to left and right at a 1/4 turns
several times until it moves smoothly, gently
holding it down.
-2 Slowly lift the reel, removing it from the case.
-3 Repeat (3) 1 and (3) 2 if the spring assembled in
the reel sticks out.
Starter handle
Friction plate
Starter case
Reel
Spiral spring
Retaining-ring C
Ratchet
Friction
spring