Filter
Top Products
– 28 –
5-3-12 GROUNDING WIRE (2)
Disconnect the two grounding wires from the alternator
and the inverter unit.
Tools : Screw driver
5-3-13 CONTROL BOX and INVERTER UNIT
Removing the cover bracket from the bottom of the
inverter unit, separate the control box and inverter unit.
For further taking apart, refer to "INVERTER UNIT
COMPONENTS" and "CONTROL BOX COMPONENTS".
M6 Bolt
Note : Remove the nut for the grounding wire on
the back side before loosening the bolt.
Screw and Washer
Bracket (Cover)
Inverter unit
Wire harness
4.0 - 6.0 N･m
40 - 60 kgf･cm
(3.0 - 4.4 ft･lbs)
INVERTER UNIT COMPONENTS