Filter
Top Products
Order
exhaust valve
15
1
Main bearing
cover
Procedures
Remarks
(1)
Remove the inner and outer tappet covers
64
x
12
mm bolt:
2
pcs.
outer circumference
from the crankcase.
Put the notch on the
of the spring retainer
(2)
Pull out the intake and exhaust valves.
Hook the medium
(3)
Remove the valve spring and the valve
on
this side.
retainer.,
size
(-)
driver at the
dent (lower side) of
the spring retainer
valves, while pulling
and pull
out
the
the spring retainer
(See
Fi.
18.)
toward
you.
(1)
From the crankcase remove the bolt
Sems bolt
fastening the main bearing cover.
6@
x
30
mm
bolt:
8
pcs.
cover evenly with a plastic hammer.
age the oil seal.
(2)
Remve the cover, lightly tapping the
Be careful not to dam.
(See Fig.
19.)
Fig.
18
Tool
10
mm
box
spanner
The front is
this
side,
:-)
driver
10
mm
box
spanner
Plastic
Hammer
r-
Fig.
19
-
16
-