Rhino Mounts FN10 Brush Cutter User Manual


 
MAINTENANCE
FN10/FN15 NITRO 01/11 Maintenance Section 5-10
© 2010 Alamo Group Inc.
MAINTENANCE
Blade Bolt Inspection
Inspect Blade Bolt Head daily for wear as followed:
Inspect the Blade Bolt Heads daily for abnormal wear. REPLACE BOTH BLADE BOLTS on
the Blades IMMEDIATELY if either blade bolts has:
Visible cracks or
If the recessed area on blade bolt is worn off or
If Blade Bolt has gouges or chipped areas.
Failure to replace abnormally worn blade bolts may lead to catastrophic failure of the blades and ejection of the
broken part which may cause serious bodily injury or death.
Always replace Blade Bolts with new bolts whenever replacing the Blades.