Rhino Mounts FN10 Brush Cutter User Manual


 
OPERATION
FN10/FN15 NITRO 02/10 Operation Section 4-22
© 2010 Alamo Group Inc.
OPERATION
Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and
are secured with pins.
Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports.IMPORTANT: DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks. OPS-R-0013_B
Ensure that the mower is equipped and
secured with wing transport locks.
Check the condition of the wing hinge pins.
Check the condition of the mower axle
suspension spring.
Inspect mower tire condition, wheel bearings,
and lug nut torque. OPS-R-0014_A
Before mower operation ensure that the bolt is
removed from both floating links on the unit.
These bolts are for shipping purposes only.
OPS-R-0086