Filter
Top Products
OPERATION
FN10/FN15 NITRO 02/10 Operation Section 4-21
© 2010 Alamo Group Inc.
OPERATION
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
• Ensure each mower slip clutch shield is
secured in place and in good condition.
• Ensure the driveline slip clutches are properly
adjusted and the friction plates are not frozen
together. Reference the Maintenance Section
for proper slip clutch maintenance. OPS-R-
0010
• Perform scheduled lubrication as specified in
the maintenance section.
• Inspect each gearbox oil level and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
• Ensure all gearbox vents are in place and free
from clogs. OPS-R-0011_A
• Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn, and missing blades
as complete sets to maintain rotary balance.
• Ensure carrier hub nuts are tightened with the
cotter pin inserted and spread.
• Inspect the condition of the deck skid shoes
and the skid shoe attaching hardware.
OPS-R-0012