Rhino Mounts FN10 Brush Cutter User Manual


 
MAINTENANCE
FN10/FN15 NITRO 01/11 Maintenance Section 5-4
© 2010 Alamo Group Inc.
MAINTENANCE
CENTER & WING GEARBOXES
The Gearboxes have been filled with lubricant to the proper level prior to shipment. However, you should check
the oil level using dipstick before operating, and frequently thereafter.
The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking. It is
recommended that the dipstick be removed after every 8 to 10 hours of operation and oil added until it rises to
proper level on dipstick. Filler Plugs are located on top of all Gearboxes. FIGURE Mnt-0004.
DIVIDER GEARBOX
The filler pressure relief dipstick is on top of the Gearbox. FIGURE Mnt-R-0005.
Do not over-fill. If Gearboxes are filled above proper level, pressure under working
conditions may cause the Grease Seals to leak.
.
Recommended lubricant for all Gearboxes is Multi-Purpose Gear Oil (P/N 00786250).