Filter
Top Products
18
www.remingtonpowertools.com
You may have further questions about assem-
bling, operating, or maintaining this product.
If so, you can visit our Technical Service web
site at www.remingtonpowertools.com or
contact our Technical Service Department
at 1-800-626-2237 (English Only). You may
also write to:
DESA Power Tools
P.O. Box 90004
Bowling Green, KY 42102-9004
ATTN: Technical Service
When contacting DESA Power Tools, have
ready:
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of re-
ceipt for written requests).
Note: Only use original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
WARRANTY SERVICE
If product requires warranty service, return
it to nearest Authorized Service Center.
You must show proof of purchase. If faulty
materials or workmanship caused damage,
we will repair or replace product without
charge. Note: Normal wear, misuse, abuse,
neglect, or accidental damage is not covered
under warranty.
NON-WARRANTY SERVICE
If product requires service, return it to nearest
Authorized Service Center. Repairs will be
billed to you at regular repair list prices.
For additional Service Center or warranty
information, call 1-800-626-2237 or visit
our Technical Service web site at www.
remingtonpowertools.com.
WARNING: Use only replace-
ment parts and accessories de-
scribed in this manual. Use of other
parts or accessories could damage
saw or injure operator.
For original replacement parts and acces-
sories, contact your nearest Authorized
Dealer or Authorized Service Center for this
product. If they can not supply the part or
accessory, contact your nearest Parts Central
listed on page 45 . Each Authorized Dealer,
Authorized Service Center, and Parts Central
is independently owned and operated. You
may also order parts from the "Online Outlet"
at www.remingtonpowertools.com.
See pages 43 through 44 for an Illustrated
Parts List.
If you need additional referral information,
contact our Technical Service Department
(see Technical Service).
TECHNICAL SERVICE
REPLACEMENT PARTS
AND ACCESSORIES
REPAIR SERVICE
If storing saw for more than 30 days, follow
steps below.
1. Remove battery from chain saw.
2. Charge battery completely. Note: It
could take up to 9 hours to complete-
ly charge the battery.
3. When battery is completely charged,
remove from charger and put protec-
tive cap on battery terminals.
IMPORTANT: To prolong battery life,
avoid leaving battery on charger for
extended periods of time (over 30
days without use).
4. Remove and clean guide bar and
chain. Clean guide bar and chain by
soaking in petroleum based solvent
or mild soap and water mixture.
5. Dry guide bar and chain.
6. Place chain in container fi lled with
oil. This will prevent rust.
7. Wipe a thin coating of oil over sur-
face of guide bar.
8. Wipe off outside of saw body. Do this
with soft cloth dampened with a mild
soap and water mixture.
9. Store chain saw and battery
• in a high or locked place, out of chil-
dren’s reach
• in a dry place
• in a carrying case or with scabbard over
guide bar
STORAGE
BATTERY DISPOSAL AND
RECYCLING
This product uses nickel-cadnium bateries.
Local, state, or federal laws may prohibit
disposal of nickel-cadnium batteries in the
ordinary trash.
To help protect the environment and con-
serve natural resources, please dispose of
batteries properly. You may contact your
local recycling center for information on
where to drop off the batteries.
We reserve the right to amend these
specifi cations at any time without notice.
The only warranty applicable is our standard
written warranty. We make no other
warranty, expressed or implied.