Filter
Top Products
20
Programming the Weatheradio
selected channel appear. Then, AUTO appears
and the Weatheradio beeps.
To manually search for channels,press
Þ
when
MANUAL appears. CHANNEL and the number of
the currently selected channel appears and the
Weatheradio tunes the channel and turns on
the broadcast so you can hear it. To select
another channel, repeatedly press
ß
or
Ü
until
the desired channel number appears.
3. Press
Þ
to confirm the selection. The
Weatheradio beeps and
CH, the number of the
currently selected channel, and
SELECT appear.
Then
SELECT CH appears.
LISTENING TO A WEATHER
B
ROADCAST
1. Press WEATHER. WEATHER, CH (channel), and
the current weather channel number appear.
If the Weatheradio finds a weather channel, the
channel’s number and appear. If the
Weatheradio did not find a weather
channel, flashes. The Weatheradio checks
the strength of the received signal while it is
turned on. The display might show any of the
following:
Ô
You See When
The Weatheradio is receiving a
very strong signal.
The Weatheradio is receiving a
strong signal.
The Weatheradio is receiving a
moderate signal.
The Weatheradio is receiving a
weak signal.
Ô NOTE Ô
If SIGNAL LOSS appears, the
Weatheradio stopped
receiving the weather
signal. STATEMENT,
WATCH, and WARNING
flash. Press any key to turn
off STATEMENT, WATCH,
and WARNING.
12-258.fm Page 20 Tuesday, March 18, 2003 2:47 PM