Filter
Top Products
6
Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a
Powermatic Model SLR12 Rip Saw. This manual contains instructions on installation, safety precautions,
general operating procedures, maintenance instructions and parts breakdown. This machine has been
designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.
Specifications
Stock number ...............................................................................................................................1791285
Main motor .................................................................................... 15HP, 3Ph, 230/460V (pre-wired 230V)
Feed motor ......................................................................................2HP, 3Ph, 230/460V (pre-wired 230V)
Controls .............................................................................................................................. 220V Magnetic
Blade speed .............................................................................................................................. 4500 RPM
Feed speeds ............................................................................................................... 30-90 FPM variable
Arbor size .............................................................................................................................. 1" (25.4 mm)
Provided Blade size ............................................................................... Dia. 12" (305 mm) x 4.0mm x 48T
Cutting depth ...................................................................................................................... 3-7/8" (98 mm)
Maximum ripping width ......................................................................................................... 18" (460 mm)
Pressure rollers ....................................................................................................................................... 5
Anti-kickback devices .............................................................................................................................. 2
V-belts ..................................................................................................................................................... 4
Table size ................................................................................................. 35" x 55" (890 mm x 1397 mm)
Table height ......................................................................................................................... 32" (813 mm)
Dust Collection Port ................................................................................................................ 4" (102 mm)
Minimum CFM required ....................................................................................................................... 600
Shipping weight ........................................................................................................................... 2530 lbs.
Net weight ................................................................................................................................... 2090 lbs.
Overall dimensions (L x W x H) ................................................... 62" x 56" x 41" (1575 x 1422 x 1041 mm)
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Powermatic reserves the right to change specifications at any time and without
prior notice, without incurring obligations.