Filter
Top Products
English-41
MAINTENANCE
Replacing the Fuel Filter
Replace the line-mounted fuel filter every
100 hours (once per season) or more
regularly if it is clogged.
Replace the filter as follows:
1. Move the hose clamps away from the
filter. Use flat-nosed pliers.
2. Pull the filter loose from the hose ends.
3. Push the new filter into the hose ends.
Position the filter with the ”FLOW” arrow
pointing up toward the carburetor. If
necessary, a soap solution can be
applied to the filter ends to ease
mounting.
4. Move the hose clamps back toward the
filter.
Checking Tire Pressures
All four tires should have a pressure of
15 psi / 103 kPa /1 bar.
Checking the Parking Brake
Visually check that no damage is found on
the lever, linages, or switch belonging to the
parking brake. Perform a stand still test and
check that there is a braking action.
To adjust the parking brake, contact the
Poulan service workshop.
8009-405
Fuel filter
8011-564
Tire pressures
IMPORTANT INFORMATION
The parking brake is a mechanical latch
brake and must not be applied when the
mower is moving. The machine must be
absolutely standing still when the parking
brake is applied.
WARNING!
Faulty adjustment can result in
reduced braking ability
causing an accident.
IMPORTANT INFORMATION
Different ire pressures on the front tires
will result in the blades cutting the grass
at different height.