Filter
Top Products
English-39
MAINTENANCE
Checking the Engine's Cooling Air Intake
Check that the engine’s cooling air intake is
free from leaves, grass, and dirt.
If the cooling air intake is clogged, engine
cooling deteriorates, which can lead to
engine damage.
Checking and Adjusting the
Throttle Cable
Check that the engine responds to throttle
increases and that a good engine speed is
attained at full throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be
made as follows for the lower cable:
1. Loosen the clamping screw for the
cable’s outer casing and move the
throttle to the full throttle position (no
choke).
2. Check that the throttle cable is mounted
in the correct hole in the lever, see
illustration.
3. Push the throttle cable’s outer casing
until choke start position, see illustration,
and tighten the clamping screw.
Checking and Adjusting the Choke
Cable
If the engine produces black smoke or is
difficult to start, this can be because the
choke cable is incorrectly adjusted (upper
cable). If doubts arise, contact the service
workshop. If adjustments are necessary, they
can be made as follows.
1. Loosen the clamping screw for the
cable’s outer casing and push the choke
control fully in.
2. Check that the choke cable is mounted in
the upper lever, see illustration. Push the
choke cable’s outer casing as far to the
left as possible and tighten the clamping
screw.
8011-491
Check and clean the cooling air intake
8011-492
Adjusting the throttle cable
8009-404
Choke start position
WARNING!
The cooling air intake rotates
when the engine is running. Mind
your fingers.