Filter
Top Products
English-30
OPERATION
Turning on the spot can be achieved by
moving one control backward (behind
the neutral position) and carefully moving
the other steering control forward from its
neutral position.
Operating on hills
Read the Safety Instructions "Slope
Operation" in the "Safety Instructions".
• The slowest speed possible should be
used before starting up or down hills.
• Avoid stopping or changing speed on
hills.
• If stopping is absolutely necessary, pull
drive levers into the neutral position and
push to the outside of the unit and
engage the parking brake.
• To restart movement, release the parking
brake.
• Pull the control levers back to the center
of the mower and press forward to regain
forward motion.
• Make all turns slowly.
WARNING!
To prevent rolling, never drive
the machine on ground with a
slope of more than 10 degrees.
Mow slopes upwards and
downwards, never across.
Avoid sudden changes in
direction.
8011-755
Stopping conditions
IMPORTANT INFORMATION
Control levers return to neutral when
released. This may cause the mower to
suddenly stop.
8011-481
Released parking brake
10 dgrees
10