Filter
Top Products
English-32
OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to
attain normal operating temperature before
stopping it, if it has been worked hard. Avoid
idling the engine for longer periods, as there
is a risk of the spark plugs fouling.
1. Disengage the mower deck by
depressing the blade switch.
2. Raise the mower deck by depressing the
pedal forward to the transport position.
3. When the machine is standing still,
activate the parking brake by pulling the
lever upward.
4. Move the throttle to the minimum position
(tortoise symbol). Turn the ignition key to
the stop position.
5. Move the steering controls outward.
6. Remove key. Always remove key when
leaving the mower to prevent
unauthorized use.
8011-668
Disengage the mower deck
4 1/2
4
3 1/2
3
2 1/2
2
1 1/2
8011-753
Raise the mower deck with the lifting pedal
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than "OFF" will cause the battery
to be discharged and the hour meter to
accumulate hours.