Filter
Top Products
7
and disconnected from power source when re-
moving jammed material from the tines. Do not
grab or hold attachment by the tines.
WARNING: Rotating tines can cause
serious injury. Keep away from rotating tines.
Stop the u nit and disconnect the power source
before unclogging tines or making repairs.
WARNING: Inspect the area to be
cultivatedbeforestartingtheunit. Removeall
debris and hard and sharp objects such as
rocks, vines, branches, rope, string, etc.
S Hold the unit firmly with both hands
S Keepfirmfootingandbalance.Donotover-
reach or stand on unstable surfaces.
S Look behind an d use care when backing u p.
S Keep all parts of your body away from the
tines.
S Neveroperatethecultivatorwithoutthetine
guard in place and properly secured.
S Keepthetines andguardclearofdebris.Al-
ways wear gloves whenservicingor clean-
ing the tines. The tines become very sharp
from use.
S Avoid heavy contact with solid objects that
might stop the tines. If heavy contact oc-
curs, stop themotorand inspectthe unitfor
damage.
S After striking a foreign object, stop theunit,
disconnect the power source and inspect
thecultivator fordamage. Repairbeforere-
starting.
S Disconnect attachment from the drive mo-
torbeforecleaningthetineswithahoseand
water toremove anybuild--up. Oil thetines
to prevent rust.
S Do not run unit at high speed unless culti-
vating.
EDGER SAFETY
WARNING: Always use handlebar
when operating edger attachment. Attach
handlebar abovearrow onsafety label onthe
upper shaft (m otor end of unit ). If your edge r
attachment does not include a handlebar, a
handlebar accessory kit (#530071864) is
availablefromyourauthorizedservicedealer.
Instructionsfor assemblinghandlebar toyour
unit are included in this kit.
Handlebar
DANGER: RISK OF CUT. KEEP
HANDS A ND FEET AW AY FROM BLADE
AND CUTTI NG AREA
. Do not a ttempt to clea r
away cut material when the blade is in motion.
Makesurepowerheadisstoppedanddiscon-
nected from power source when re mov ing
jammed material f rom the cutting blade. Do not
grab or hold unit by the cutting blade.
WARNING: I nspect the area to be
edged before each use. Remove objects
(rocks, broken glass, nails, wire, etc.) which
can be thrown by the blade or can wrap
around the shaft.
S Blade rotates momentarily after the trigger
is released. The blade can seriously cut
you o r others.
S Allow blade to stop before removing itfrom
the cut.
S Hold the unit firmly with both hands.
S Keepfirmfootingandbalance.Donotover-
reach or stand on unstable surfaces.
S Throw away blades that are bent, warped,
cracked, broken or damaged in any other
way. Replace parts that are cracked,
chipped, or damagedbefore u sing theunit.
S Keep all parts of your body away from t he
blade.
S Keep blade guard in place and in good
working order.
S Always keep the wheel in contact with t he
ground.
S Always push the unit slowly over the
ground. Stay alert fo r uneven sidewalks,
holes in the terrain, large roots, etc.
S To reduce the risk of fire, do not allow exces-
sive grass, leaves, or grease to accumulate
on the attachment.
S Objects struck by the cutting member can
cause serious injuries to persons. The lawn
should always be carefully examined and
cleared of all objects prior to edging.
SAVE THESE INSTRUCTIONS