Filter
Top Products
11
OPERATION
KNOW YOUR PRUNER
READ THISINSTRUCTION MANUALAND SAFETYRULESBEFOREOPERA TINGYOURUNIT.
Compare the illustrations with your unit to familiarize yourself with t he location of the various controls
and adjustments. Save this manual for f uture reference.
Cord Retainer
Assist Ha ndle
Recessed
Plug
Tri
g
g
er Switch
Motor Housing
Shaft
Coupler
Pruner
Chain
Bar
Bar oil fill cap
Bar nut
Shoulder S trap Clamp
Attachment Hanger
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethetriggerswitchtooperatethe
unit. Release to stop.
COUPLER
The C OUPLER enables optional attach-
ments t o be installed on the unit.
CHAIN TENSION
It is normal for a new chain to stretch during
first 15 minutes of operation. You should
check your chain tension frequently. See
CHAIN TENSION in the SERVICE ANDAD-
JUSTMENTS section.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on
your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord Gauge
25 Ft. (7.5 m)
50 Ft. (15 m)
100 Ft. (30 m)
18 Gauge
16 Gauge
14 Gauge
Extension cords a re available for this unit.
AT TACH THE EXTENSION
CORD TO YOUR PRUNER
Makealoopinyourextensioncordandattach
the cord as shown. Ensure the plugand cord
are firmly and fully engaged.
Cord Retainer
Extension Cord
Recessed P lug on Unit
BEFORE STARTING PRUNER
Be sure to read the electrical safety informa-
tion in the safety rules section of this manual
beforeyoubegin.Ifyoudonotunderstandthe
electrical safety information donot attempt to
use your unit. Seek help from someone that
does understand the information or call the
customer assistance help line at
1-800-554-6723.
GUIDE BAR AND CHAIN OIL
The bar and chain require lubrication. The
chain oiler provides continuous lubrication to
thechainandguidebar. Lackofoilwillquickly
ruin the bar and chain. Too littleoil will cause