Filter
Top Products
11
ATTACHING SHIELD
(for line trimmer attachment)
WARNING: Theshieldmustbeprop-
erly installed. The shield provides partial protec-
tion from the risk o f thrown objects to t he opera-
tor and others a nd is equipped with a line limiter
blade which cuts excess line to the p roper
length. The line limiter blade (on underside of
shield) is sharp and can cut you.
For p roper o rientation of shield, see KNOW
YOUR TRIM M ER AT TACHMENT illu stration i n
OPERAT ION section.
1. Remove wing nut from shield.
2. Insert bracket into slot as shown.
3. Pivot shield until bo ltpasses through hole
in br acket.
4. Securely tighten wing nut onto bolt.
Slot
Shield
Wing
Nut
Bracket
Line Limiter
Blade
PIVOT
OPERATION
KNOW YOUR UNIT
READ THIS INSTRUCTION MANUAL AND SAFETYRULES BEFORE OPERATING YOURUNIT.
Compare the illustrations with your unit to familiarize yourself with t he location of the various controls
and adjustments. Save this manual for future reference.
Cord Retainer
Assist Handle
Recessed
Plug
Trigger Switch
Motor Housing
Shaft
Coupler
Pruner
Chain
Bar
Bar oil fill cap
Bar nut
Shoulder Strap Clamp
Attachment
Hanger
Shield
Line Trimmer
Attachment
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethetrigger switchtooperatethe
unit. Release to stop.
COUPLER
The COUPLER enables optional attach-
ments to be installed on the unit.
CHAIN TENSION
It is normal for a new chain to stretch during
first 15 minutes of operation. Yo u should
check your chain tension frequently . See
CHAIN TENSION in the SERVICE AND AD-
JUSTMENTS section.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on
your unit.
SELECT AN EXTENSION CORD
ExtensionCordGaugeChart
Length of Cord Gauge
25 Ft. (7.5 m)
50 Ft. (15 m)
100 Ft. (30 m)
18 Gauge
16 Gauge
14 Gauge
Extension cords are available for this unit.